Well, if it isn't broke, don't fix it. The only thing there is inside
the caliper is a seal. If it doesn't leak, fine, don't touch it. Do the
rest of the caliper by all means, but leave that seal where it is.
Best, Per
Den 2017-02-18 kl. 19:24, skrev Mike Tobin:
> Hi All,
> Time to attack the front calipers on the BT7. They've been sitting for
> over 30 years and are really sad looking.
> I'm thinking the only way I'm going to get a purchase on them to get
> them out is to split the calipers. The factory manual, however, sez
> (in BOLD) to not attempt this. Why is this? In the archives folks say
> it can be done. Anything I have to watch for other than being clean and
> careful?
> Cheers and Thanks,
> Mike Tobin
> Townsend, Montana
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/per at
> schoerner.se
>
|