Moldex will make the crank any way you want it unlike the CA source
Sent from my iPhone
> On May 21, 2016, at 6:29 AM, "Greg Blake" <gblake58tr3@icloud.com> wrote:
>
> Marine Crankshaft in California. They have made 5, that I know of, as of 2011
> when we had a batch of 3 made. It is a dummy main design as well that John
> Frymark (I believe) helped them design.
>
> We had two made with an alternate rod journal diameter so that cheap and
> plentiful small block rods and bearings could be used.
>
> Due to the dummy main design, a very minor amount of block grinding was
> required to clear the throws, was not a big deal at all.
>
> We have been very impressed with the cranks.
>
> They did miss their deadline by a few months, so order early and call often.
>
> Sent from my iPhone
>
>> On May 20, 2016, at 11:52 PM, Tony Drews <tony@tonydrews.com> wrote:
>>
>> Crower made a run of them, might want to check with them. They were more
>> expensive than Moldex was at the time. They have a dummy main design -
>> dummy mains between 1/2 and 3/4 so the crank is more like what they are used
>> to making.
>>
>> Cheers, Tony
>>
>> At 08:50 PM 5/20/2016, Mike Jackson wrote:
>>> Do we have any alternate suppliers for billet cranks other than Moldex?
>>>
>>> Mike
>>> _______________________________________________
>>> fot@autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>>
>>
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/gblake58tr3@icloud.com
>>
>>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jhasty@mhc-law.com
>
>
CONFIDENTIALITY NOTICE: This electronic mail transmission has been sent by a
law firm on a legal matter. It may contain information that is confidential,
privileged, proprietary, or otherwise legally exempt from disclosure. If you
are not the intended recipient, you are hereby notified that you are not
authorized to read, print, retain, copy or disseminate this message, any part
of it, or any attachments. If you have received this message in error, please
delete this message and any attachments from your system without reading the
content and notify the sender immediately of the inadvertent transmission.
There is no intent on the part of the sender to waive any privilege, including
the attorney-client privilege, that may attach to this communication. Thank you
for your cooperation. 11 U.S.C. 528(a)(4) NOTICE. We are a debt relief agency.
We help people file for bankruptcy relief under the federal Bankruptcy Code.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|