I should probably clarify a bit. I just purchased a dog box, it's on the way
to Colorado. I still use a stock crank so my rev limit is 6 - 6200 RPM.
In Colorado I use the OD on the longer straights, my final drive is 4:10 .
If I go back to a 4 speed I'll run out of rev's and If I go to 3:70's I
expect
to lose some time getting off the corners. I may just have to wait until I
get the Moldex crank sometime in the future so I can increase my
rev limit.
-----Original Message-----
From: Fot [mailto:fot-bounces@autox.team.net] On Behalf Of Keith Files
Sent: Saturday, February 20, 2016 9:04 AM
To: Joe Alexander <joealexandervintage@gmail.com>
Cc: fot@autox.team.net
Subject: Re: [Fot] Bastuck Dog Box Available
Dear all,
I have 2 dog boxes for my Sebring TR4 with the gear sets supplied by
Bastuck; I can confirm that they are way better than the Quaife gear sets
that I run in my 2 dog boxes that I have for my TR6.
Try, you will not be disappointed.
Keith
Sent from my iPad
> On 20 Feb 2016, at 15:13, Joe Alexander <joealexandervintage@gmail.com>
wrote:
>
> List,
>
> If you have an interest in a Bastuck dog box, please contact me.
>
> Bastuck just did a short run of their very good gear sets.
>
> We have two kits coming. One will be available for sale below retail
price.
>
> I'd have to pursue, but there might be a potential for a group purchase.
>
> All things considered we decided that a Bastuck dog box was preferable
over a Triumph close ratio conversion or converting to a non-Triumph tranny
with less desirable ratios.
>
> Witness Chris Marx' YouTube submittals.
>
> Regards,
>
> Joe Alexander
> 645 1st Street
> Jesup, IA 50648
> The-vintage-racer.com
> Gasketinnovations.com
> Cell: 319.464.4711
>
>> On Feb 20, 2016, at 12:36 AM, Tony Drews <tony@tonydrews.com> wrote:
>>
>> Bastuck makes dog box internals with an OD mainshaft.
>>
>> Tony Drews
>>
>> At 12:17 AM 2/20/2016, Jim Gray wrote:
>>> Content-Type: multipart/alternative;
>>> boundary="----=_NextPart_000_063C_01D16B6B.B9FA8210"
>>> Content-Language: en-us
>>>
>>> Can anyone tell me if it's possible to add a Jtype OD to a TR4/6 dog box
?
>>> Jim g
>>> _______________________________________________
>>> fot@autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>>
>>
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/keithfiles@btinternet.com
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|