If it's a mk I head, toss it and find a mk II
Sent from my mobile device
> On Jun 30, 2014, at 10:38 AM, Jeff Durant <jeff_durant@comcast.net> wrote:
>
> Jason,
>
> GT6 mk1 or plus (mk2) head?
> Regards,
>
> Jeff Durant
> #12 TR6
>
>
> Sent from my iPhone
>
>> On Jun 29, 2014, at 1:07 PM, Jason Sukey <jsukey@gmail.com> wrote:
>>
>> I'm getting ready to mill the head on my GT6 for a bump in compression. I
>> currently measure 3.255" thickness, my math shows that I want to end up at
>> 3.215" when I'm done. I can't find much info on how far people are safely
>> milling the GT6 version of this head, only TR6 info. Does anyone have
>> experience on this? Is there enough meat in the casting to remove this
>> much material without hitting water?
>>
>> Thanks,
>>
>> Jason Sukey
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jeff_durant@comcast.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|