Marty, I may have more than one, shocking I know!
Hang on to yours until I find out; I'll just send him one of mine.
Thanks, Bill
----- Original Message -----
From: "marty" <trmarty@hotmail.com>
To: "John Styduhar" <johnstydo@gmail.com>; "FOT" <fot@autox.team.net>
Sent: Wednesday, January 08, 2014 9:57 AM
Subject: Re: [Fot] Extended bottoming tap for TR4 engine
> Hi John. I have one I made up that you are more than welcome to borrow if
> you
> would like. If so, email me your address and I can drop it in the mail.
>
>
>
> Marty
>
>
>> Date: Wed, 8 Jan 2014 09:46:04 -0500
>> From: johnstydo@gmail.com
>> To: fot@autox.team.net
>> Subject: [Fot] Extended bottoming tap for TR4 engine
>>
>> Does anyone have a tool source for a 1/2-13 extended bottoming tap to
>> reach
>> the four deep head studs on the TR4 pot? Looks like at least 6" OAL.
>> Any comments on the value of bottom-tapping blind holes to improve stud
>> holding? Thanks
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/trmarty@hotmail.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|