In our case the pin was also very worn and I had to replace that part also,
Tim
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Dave Hogye
Sent: Wednesday, November 27, 2013 10:07 AM
To: Friends of Friends of Triumph
Subject: [Fot] bushed bell crank
Hello Mike and Mike,
I made a bell crank with a shouldered bronze bushing from hardware store
parts. It works perfectly and I don't think I'll ever have to fiddle with
it a gain, except maybe add a drop of oil every couple years or so.
I might be able to make a couple up if you'd like.
Here are some photos of the set up.
Dave H.
http://s1305.photobucket.com/upload?location=Subaru WRX STI/bell crank
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com
[demime found a multipart/alternative section which it tried
to parse but could not find any section which it could render. Please send
plain text.]
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|