I contacted the owner of this company directly last year. They are a
local company near Detroit, Mi
The floor pans are soft tooled (Big 3 engineering term for temp tools).
The floor pans are not comparable to the British Motor Heritage floor
pans available from the British Parts Suppliers.
If you have the body off, I would not recommend these as they do not
have the ~3" downstanding flange that connects to the lower rocker.
There are also no holes or weld nuts for the tunnel.
I would consider this a patch panel to drop in rather than a factory
repair part.
FYI
Glenn
On 10/4/2013 8:25 AM, Robert M. Lang wrote:
> The URL for this company is:
>
> c2cfabrication.com
>
> I have no direct experience with them (that I know of).
>
> Part of me wonders if they picked up the tooling from one of the body
> panel fabricators from "back in the day". The names escape me, but I
> used to have a couple of catalogs back in the 80's from at least a
> couple of companies that made panels and partial panels for pretty
> much everything.
>
> In any case, the web site looks promising.
>
> Regards,
> rml
>
> p.s. nice job getting your car BACK ON TRACK at ELVF! That was pretty
> kool IMHO.
> ---------------------------------------------------------------------------
> Bob Lang Triumph TR6!! | This space for rent
> Former NER Solo Chair |
> Voice:617-253-7438 | Cell: 339-927-4489
> ---------------------------------------------------------------------------
>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/gaf3@charter.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|