What are you running for a clutch? Any chance you overextended the pressure
plate?
Sent from my Verizon Wireless smartphone
Mike Moore <mmoore@wave1.net> wrote:
>This is for my race car that I am getting ready for Jefferson 500.
>
>
>
>I had to put in new clutch master (Wilwood 5/8, same as was in car), and new
>slave (stock from Roadster factory.
>
>
>
>With car running when I try to engage gear I have to push clutch all the way
>to floor, works in last half inch, but then the clutch pedal sticks and
>won't come back up.
>
>
>
>I have bled a lot and don't see any more air bubbles.
>
>
>
>Do I need to adjust rods on either cylinder or is it air.
>
>
>
>Thanks
>
>Mike
>
>
>
>Michael T. Moore, CPA
>
>2007 West 32nd Street
>
>Erie, PA 16508
>
>
>
>Phone: 814-868-4831 ext 103
>
>Fax: 814-864-7383
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/yellow04@tr4racer.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|