...as a side note< I should give credit to My father n law "gene" for
designing or coming up with the cooling system mods. Gene is a retiried engine
builder (sprint car/midget/hotrod) and also "his"bikes owned the 1 mile flat
track world records in the late 60's and 70's when he worked for BSA and
Triumph . Now, If anyone wishes to have the cooling system mods done , contact
me off list and we'll work something out. Tony Garmeywww.horizonracing.com
> From: horizonracing@msn.com
> To: cartravel@pobox.com; fot@autox.team.net
> Date: Wed, 12 Sep 2012 12:59:12 -0700
> Subject: Re: [Fot] Never be beaten by equipment
>
> All my TR3/4 engines are fitted with a dash 8 line from the cold side of
the
> water pump to the Block drain and a dash 6 from the water fitting in the
back
> of the head to the thomo housing. Requires some welding and maching of
bungs
> in the right places. Tony
> > Date: Wed, 12 Sep 2012 14:17:12 -0500
> > From: cartravel@pobox.com
> > To: fot@autox.team.net
> > Subject: Re: [Fot] Never be beaten by equipment
> >
> > I have seen a lot of people that run the line from the rear heater port
> > to the pump intake. This will encourage more flow to the rear of the
> > engine, but then it is taken away, so there is less flow through the
> > head and back to the pump. I spoke to a guy that modified his pump for
> > an outlet so that he could run water directly from the pump to the rear
> > of the engine. I believe he ran it to the drain hole at the bottom of
> > #4. Seems like a neat idea and I'm surprised no one else has done it.
> >
> > The best thing I ever did to help with this problem was to install a
> > Chevy radiator that was the width of the inner fenders in my TR3. I
> > then had much more control over the heat in the engine.
> > Larry
> >
> > On 9/12/2012 9:24 AM, EDWARD BARNARD wrote:
> > > My question to the group is, to aid coolant flow to the rear cylinder I
> have
> > > always routed the heater bypass pipe running down the left side of the
> engine
> > > up to the heater valve port on the right side of the head. My thought
> being
> > > that it is similar to "cracking" open the heater valve on your street
car,
> and
> > > that it would allow some flow to the backside of the #4 cylinder.
> > > Any thoughts on this? Glen?
> > _______________________________________________
> > fot@autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe:
> http://autox.team.net/mailman/options/fot/horizonracing@msn.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/fot/horizonracing@msn.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net
|