Oops!
http://www.advanceautowire.com/tr2506.pdf
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Jack Brooks
Sent: Friday, November 04, 2011 5:34 PM
To: 'triumph fot'
Subject: Re: [Fot] Abbreviated electrical harness
Harness schematics
http://www.advanceautowire.com/tr24a.pdf
http://www.advanceautowire.com/tr24a.pdf
Jack
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of sherry robyn
Sent: Thursday, November 03, 2011 7:21 PM
To: RACER BUD; Joe Curry; triumph fot
Subject: Re: [Fot] Abbreviated electrical harness
Thanks for the responses.
This car is an exSCCA racer from the ninties (in
Hawaii no less so it has its
share of Bondo). Also, what they didn't take
off I did. It is highly unlikely
that it will ever see the street again.
As
to me making the harness, I have definitely thought of that but my auto
electrics are OK but not wonderful. Most elements I understand with no
problem
but many times I am hazy on some of the details. If I had a
schematic, I would
have no problem.
Jim
To: Joe Curry <spitlist@cox.net>;
sherry robyn <sherryjimmy6116@att.net>;
triumph fot <fot@autox.team.net>
Sent: Thu, November 3, 2011 6:48:57 PM
Subject: Re: [Fot] Abbreviated
electrical harness
Jim...I say leave the harness in....unless you're going to
make it road
racer..The reason is: when the time comes to sell the car, it
will have all
of the necessary wiring for the street.
RB
----- Original
Message -----
From: "Joe Curry" <spitlist@cox.net>
To: "'sherry robyn'"
<sherryjimmy6116@att.net>; "'triumph fot'"
<fot@autox.team.net>
Sent:
Thursday, November 03, 2011 5:44 PM
Subject: Re: [Fot] Abbreviated electrical
harness
> Make it up yourself. Couldn't be all that hard!
>
> -----Original
Message-----
> From: fot-bounces@autox.team.net
[mailto:fot-bounces@autox.team.net] On
> Behalf Of sherry robyn
> Sent:
Thursday, November 03, 2011 4:42 PM
> To: triumph fot
> Subject: [Fot]
Abbreviated electrical harness
>
> I have a 74 TR6 that I only use for
autocross, etc. I would like to rip
> out
> all
> of the stock wiring and
install an abbreviated harness with relays. I
> only need
> to service the
following:
>
> ignition switch
> starter motor
> electronic
> ignition
>
altenator
> two radiator fans
> three gauges
> temp
> volts
> oil
>
(manual)
> kill switch
>
> Any ideas on a good source for such a harness.
>
>
Thanks,
> Jim
> _______________________________________________
>
fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate:
http://www.team.net/donate.html
> Archive: http://www.team.net/archive
>
Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/fot/spitlist@cox.net
>
_______________________________________________
> fot@autox.team.net
>
>
http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe:
> http://autox.team.net/mailman/options/fot/budscars@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jibjib@att.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jibjib@att.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|