Hello all,
Does anyone know the tolerable limits to frame measurements for TRs. I'm about
to put my TR3 body back on the frame and things are reading a little out. I
have a 3/8" difference from front axles to back, and on the short side, the
right, it's about 3/8" up on the front corner. The car did have a couple badly
bent wheels on it when I bought it, but it had no evidence of being in any
nasty fender benders and all of the body panels were original. It doesn't seem
like a real problem to me, but now would be the time to tweek it a bit and I do
have access to a frame machine.
I'd appreciate any comments,
Dave H.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|