Re: [Fot] Accusump

[Steven Belfer <colordog.1@earthlink.net>]

I installed a 2 QT Accusump in the trunk of my TR3.   A better  
location would be the rear "Seat" but I didn't feel like relocating my  
firebottle and I have a passenger seat.
  I used -10AN hose and run the T-fitting and check valve.  This is  
temp because I intend to plumb it straight into the oil gallery.  (My  
other motor is ready to go with this fitting installed.)
I use the EPC valve which works fine.  This whole thing is just an  
insurance policy, plus it pressurizes the system while starting the car.
I recommend you call the people at Canton racing products and ask them  
any questions if you have any.  I did this and found them to be very  
helpful and friendly.


~Steve
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums