I hooked up five of the oil gallery ports to a manifold fed from a T as
others have describe. Plembing setup is like this:
Oil filter to Thermostat [then to oil cooler then to from oil cooler to
thermostat] from thremostat to one way valve to a T. One side of T to
Accusump, other to the manifold [referred to by KAs as the "octopus"]. An 4
lines from maifold to AN4-1/8 npt to adapters in oil gallery.
Annotated photos are available at:
http://picasaweb.google.com/Triosan/OilGalleryPlumbing#
On Tue, Sep 7, 2010 at 12:44 AM, <n197tr4@cs.com> wrote:
> Andre,
>
> Please send photos to Sean, too.
>
> seanax@iowalaser
>
> Thanks for the contribution to the list, once again.
>
> Joe
>
>
>
>
>
>
>
> -----Original Message-----
> From: WILLIAM TOBIN <william.tobin3@verizon.net>
> To: fot@autox.team.net
> Sent: Sat, Sep 4, 2010 4:56 pm
> Subject: [Fot] Accusump
>
>
> Guys, thanks for all the info and advice on the Accusump.
> ndre, great photos, thanks.
> ow to order all the bits I need.
> hanks again, Bill
> ______________________________________________
> ot@autox.team.net
> http://www.fot-racing.com
> Donate: http://www.team.net/donate.html
> rchive: http://www.team.net/archive
> orums: http://www.team.net/forums
> nsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/triosan@gmail.com
>
>
>
--
Chuck Arnold and Kathleen Kelley
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|