Dennis
I have welded up several diffs with no problem. I mig in a piece of quarter
plate between the side gear . I have never preheated and had no problems .
Just remember to allow clearance for the axles to pass right through the
side gears or you make have to cut a bit off the end of the axle. How do i
know!
Geoff Byrne
TR6 racer down under
----- Original Message -----
From: "Dennis DeLap" <yellow-green@sbcglobal.net>
To: "FOT" <fot@autox.team.net>
Sent: Friday, September 11, 2009 1:38 PM
Subject: [Fot] Welded Diff & Chuck Gee
> Amici - I am going to try my hand at welding up a diff.
>
> Any tips?
> Thanks
> Dennis DeLap
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> You are subscribed as gkbyrne@optushome.com.au
>
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|