fot
[Top] [All Lists]

Re: [Fot] crank scraper

To: "Kramer, Robert" <RKramer@rdoequipment.com>
Subject: Re: [Fot] crank scraper
From: Bill Babcock <Billb@bnj.com>
Date: Sat, 16 Aug 2008 11:22:42 -0700
I run the oil level at the bottom of the dipstick with a two quart  
accumulator. No engine problems in years, every since I started  
running an accumulator on the oil gallery.
On Aug 15, 2008, at 6:06 AM, Kramer, Robert wrote:

> I may be off base on this topic because I have no data to support  
> what I have
> been doing, but I run about a quart low on the dipstick with a 3 quart
> accumulator attached to the main oil galley. I watch the oil gauge  
> and have
> not seen it bouncing around. The idea is to keep oil off the crank  
> and I do
> have one of the Uncle Jack crank scrapers to push the oil back in  
> the pan. Is
> anyone else running lower oil levels like this? I would probably be  
> better off
> with one of those fancy crank scrapers and a full oil pan.
>
> --
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>