The sandwich of material when adding a crank scraper and windage tray spacer
drops the oil pan (in my case) about 3/16 of an inch. Should I be adjusting
the high oil mark on the on the oil dip stick. Or is this move to small to
worry about ?
Robert Bentley's book states 8 pints to fill an empty sump and 9 pints if the
filter is changed out. I have an oil cooler etc. I have also had to change
the dip stick and its holder tube in the block. With the cooler and filter I
was in the range of 6 plus qts.
Is it logical to take a new motor with out the filter on add the 8 pints
let the oil settle this should give me the new bench mark needed on the dip
stick. Right ?? I believe most of the additional oil for the cooler and spin
on filter never settles back to the sump. thanks for the help
rob
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|