I built a 77' foot slot track on a on 4 X 8 board that went up into the
ceiling of my two car garage counter weighted by TR-3 flywheels (what else).
I made the whole thing. I used a router to cut the slot in 1" fiber board
then laid down the copper strips on each side. It was terrific with a cross
over and constant radius turns, hairpins and fast sweepers. I used a battery
charger to power the brakes so that when you let off the throttle that applied
the brakes. Also had lights on some of the cars for night racing. Really fun
stuff, 1/32 scale, and about 15 cars. That was not yesterday, but about 1976.
Lots of very good drivers came to contest my layout. Some of them I told
about the brakes, but not everyone. Hey, there is a little advantage to a
home course. You don't ask, you don't get brakes.
Never Be beaten by Equipment
Kas Kastner
----- Original Message -----
From: Herald948@aol.com
To: fot@autox.team.net
Sent: Saturday, December 16, 2006 8:30 PM
Subject: Re: [Fot] SLOT CAR RACING SYSTEM
In a message dated 12/16/2006 8:48:26 P.M. Eastern Standard Time,
rkramer3@austin.rr.com writes:
What is the
best way to go buying a slot car set these days, something not too serious
but that won't have cars flying off the track.
==AM==
WON'T have cars flying off the track? Bob, that's half the fun of slot-car
racing (he says, with that Gomez Adams-like gleam in his eye)!
--Andy Mace, an old-time "TunderJet 500" HO scale fan ;-)
*Mrs Irrelevant: Oh, is it a jet?
*Man: Well, no ... It's not so much of a jet, it's more your, er, Triumph
Herald engine with wings.
-- Cut-price Airlines Sketch, Monty Python's Flying Circus (22)
Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph
Herald
Database: _http://triumph-herald.us_ (http://triumph-herald.us/)
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|