Bill
I'll be at CRC......
Hey, where were you at Pacific Raceways last weekend? There were
exceptionally large grids and August-like weather (about 92 degrees). The
Triumph contingent was short handed save for Robin Bee and Jeff Quick. John
James had head gasket and transmission problems that brought out the black
flag and kept him in the paddock most of the weekend. Charly Mitchel and I
didn't get our cars done in time.
Jeff had overdrive issues but still managed top ten runs in group 3. His car
has been returned to a beautiful medium blue metallic as campaigned by his
dad years ago.
Mark
PS: Cameron Healey and Dennis Akers got moved up to group 2 (you may have
been moved as well?)
-----Original Message-----
From: Bill Babcock [mailto:BillB@bnj.com]
Sent: Tuesday, July 04, 2006 1:12 PM
To: 'Mark York'; N197TR4@cs.com; fot@autox.team.net
Subject: RE: [FOT] Rear Spring and Shackle Bushing Kit
What!! Aren't you coming down for the Portland Historics?
> -----Original Message-----
> From: owner-fot@autox.team.net
> [mailto:owner-fot@autox.team.net] On Behalf Of Mark York
> Sent: Tuesday, July 04, 2006 9:59 AM
> To: N197TR4@cs.com; fot@autox.team.net
> Subject: RE: [FOT] Rear Spring and Shackle Bushing Kit
>
> Full-Commercial Message:
> I installed the kit last week along with some bronze bushings
> I had made for the front spring eye; it's quick and easy to
> install. It's probably nothing like adding a panhard rod but
> I think this is a poor (or lazy) mans option to tighten
> things up a bit at the rear. I'll be testing it at the SCCA
> Vintage grid at Bremerton Raceway in 3 weeks.
> Mark
>
>
> -----Original Message-----
> From: owner-fot@autox.team.net
> [mailto:owner-fot@autox.team.net] On Behalf Of N197TR4@cs.com
> Sent: Saturday, July 01, 2006 11:13 AM
> To: fot@autox.team.net
> Subject: [FOT] Rear Spring and Shackle Bushing Kit
>
> Semi-Commercial Message:
>
> Fifteen years ago, I came up with bushing kit made of brass.
> In building my TR project, I put together another kit with
> some improvements.
>
> I sent one to Mark York for his use, and now wonder if others
> might be interested. If you guys are interested, I might go
> to the street guys next.
>
> I have a picture of the kit, if you want to see it.
>
> I can produce and assemble the kit in volume for about $30
> per kit. It would take about 25 kits to make it worthwhile
> to go through the exercise, once, but I would do it and
> perhaps be ready to ship by September.
>
> Whaddya think?
>
> Joe (A)
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
>
>
> === Help keep Team.Net on the air
> === http://www.team.net/donate.html
|