I had very little problems getting the stock axel stubs out. I didn't have
a press though, I think I used what we call a single jack or it might have
been a half jack. I basically took the upright and supported it with a
piece of pipe of the proper diameter and length and popped it loose with a 5
lb maul. I don't recall if I heated it slightly or not, but it came out
easy.
I haven't heard anything about the uprights being inferior on the TR6 or
TR4.
Charly Mitchel
TR6 #44
=== unsubscribe/change address requests to majordomo@autox.team.net
|