You should not get a large swing in CR wght after small changes in toe To
set CR wght Get a test wedge( small medium large) screw driver >> Ues it
under the spring in and out till you the CR iswere you wnat it then make a
permint size wedge good luck rob
----- Original Message -----
From: <Gt6steve@aol.com>
To: <FOT@autox.team.net>
Sent: Tuesday, April 05, 2005 10:14 PM
Subject: Suspension setup sequence?
> Amici,
> I've been playing with the setup on the GT6 the past couple of days. I'm
> still measuring and not yet tweaking. The car has a decided list to
> starboard,
> about one degree low on the drivers side with 200 Lbs in the seat. My
> thinking
> is that corner weights should be optimized before I set any toes. Does
> that
> seem right?
>
> In addition, can anybody see a tricky way to adjust corner weights on the
> rear transverse spring? Chuck Gee's brilliant Spitfire solution doesn't
> readily
> transfer to the GT6...
>
> Steve Smith
|