Bruce Wentzel sells them. He'd know.
Not on FOT list (he's a Corvette guy). I got mine from him 2-3 years ago.
Bruce is at greendot1@comcast.net.
Or you can get them from Solo Performance Specialties --
www.soloperformance.com -- tell him (Dave Whitworth) what your car is and he
supplies the part.
--Rocky Entriken
----- Original Message -----
From: <WEmery7451@aol.com>
To: <mcandrew@pol.net>; <fot@autox.team.net>
Sent: Sunday, March 13, 2005 12:24 AM
Subject: Re: Speedbleeders
> In a message dated 3/12/05 4:39:37 PM Pacific Standard Time,
> mcandrew@pol.net
> writes:
>
> << Does anyone use and/or know the part numbers for Speedbleeders for 1957
> TR3 Girling brakes/clutch hydraulics >>
>
> I imagine that you are talking about something more exotic than this.
> Advanced Auto Parts stores sell an inexpensive vacuum pump for bleeding
> brakes and
> hydraulic clutches. Connect the hose to the bleed valve, open the bleed
> valve,
> suck out brake fluid until the bubbles disappear, and close the bleed
> valve.
> It has worked very well for me, especially since the three kids are gone,
> and
> my wife has no desire to pump the brake and clutch peddles.
|