Rob,
If you want to upgrade further, I make an aluminum hub that takes larger
bearings. It utilizes a bearing sleeve so that the roller bearings aren't in
direct contact with the axle. Increases axle life considerably.
Let me know if you are interested. I can probably get you a package deal with
a local axle manufacturer too.
Chuck Gee
Spitfire #14
In a message dated 1/3/2005 5:13:16 PM Eastern Standard Time, "Rob Stewart"
<robstewart@telwares.com> writes:
>All:
>
>I'd like recommendations and any information available on procuring a new
>set of billet steel axles for my vintage race Spitfire. I haven't had to
>look for these in quite some time and don't know who is still making them,
>or what the experience (good or bad) folks have had with the various
>suppliers.
>
>Any information is greatly appreciated.
>
>Best regards,
>
>Rob Stewart
>1967 Spitfire #6
|