On Sun, 21 Feb 1999, Tony Drews wrote:
> Hi, any helpful hints on removing the tar-like undercoating from my
> TR-4's wheelwells? I'm considering warming it up with a propane torch
> to see if I can scrape it off...
>
> Thanks in advance, Tony Drews
Tony,
That's how I did it... Of course the body was not attached
to the frame at the time and anything flammable was put well away.
Also if you can find some card board or really cheap paricle board
put it under the body. Then when you are done just toss the whole
mess away. Oh yes use work gloves and a couple of paint scrapers,
and an old long-sleeve shirt and jeans that you don't care if they
gets totaled. It's a messy ugly job....
Greg
gpetrola@prairienet.org 1962 TR4 (CT4852L)
"That's not a leak... My car is just marking its territory!"
Greg Petrolati, Champaign, Illinois
|