Re: Undercoating

["Bill Sohl" <billsohl@mailhost2.planet.net>]

Tony wrote:
> Hi, any helpful hints on removing the tar-like undercoating from my
> TR-4's wheelwells?  I'm considering warming it up with a propane torch
> to see if I can scrape it off...

That is the method I used on a TR-3 floorpan.  It is slow, but
it works.  Once the majority of old undercoating is off, you
can clean up the residue with cheap paint thinner and lots of old
rags.

Caution - WELL VENTILATED AREA should be
used.  Outside preferrable.

Bill Sohl