Hi Stan,
A light rubbing with a product called Goof-Off should do it (Wal-mart and
many, many others). Google Goof-Off (it's made by Valspar). Try a terry
cloth rag. Be careful with getting it on the paint you DON'T want removed,
but it works well, as long as the rubber is in OK shape to begin with and
won't crumble with minor scrubbing. It's not a "paint peeler" like Jasco,
but it does have some nasty chemicals in it. I've used it to remove latex
paint off of hardwood floors and had NO adverse effects, even with a fairly
hard "scrubbing". We even used to remove carpet adhesive from the nap of
carpet and not had any degradation of the carpet. If it's soft rubber parts,
like spongy trunk lid rubber or the front bow gasket, a new gasket is maybe
in order. Just sayin!
After you're done, wipe well again with a damp (water) rag, to remove any
residue. Let it dry and clean it up with a rubber conditioner. Since you
need it to NOT be sticky, try (again :-) hehehe) a silicone lubricant like
Jig-a-loo. The silicone should have no negative effect on the rubber, unlike
some other dressings, or like a hardcore petroleum based product.
For the decal removal...this also works well. If they're old, dried up vinyl
decals, try to remove as much as you can by hand. Lift from the edge and
pull. All I can tell ya there. Use the Goof-Off as you can and work it from
the edges. The glue WILL dissolve, the paint will not (typically). As all
disclaimers say, test on a small inconspicuous spot first!!
Matt Smith
If you need further, please check out a book called "How to clean (almost)
anything".
-----Original Message-----
From: datsun-roadsters-bounces+matthews517=earthlink.net@autox.team.net
[mailto:datsun-roadsters-bounces+matthews517=earthlink.net@autox.team.net]
On Behalf Of stan
Sent: Sunday, August 10, 2008 3:59 PM
To: Datsun Roadster List
Subject: [Roadsters] overspray on rubber parts
Hello all, first off I'd like to thank Gary and Greg for helping me out
with my tachometer issue.
I pulled the tach cable and lubed it up as per their recommendations.
It seems to be working better now but still not 100%.
I discovered during this process that the straighter the cable is, the
less it tends to jump at lower
rpm's. Almost there. Thanks guys!
I'm wondering if anyone out there has tips on what products to use to
clean off overspray on rubber parts.
My trunk gasket has 10 year old overspray on it and I can't seem to get
it off. It's not a heavy paint, but a mist.
Unfortunately it's red and not black :-(
Somewhere out there I thought there was a coating that you can put
overtop of tires and other rubbers which restores the
color (almost like a black coating).
Does anyone have any tips?
If so I'd greatly appreciate any advice.
Cheers!
Stan from Coquitlam (just outside of Vancouver)
1969 - 1600
________________________________________
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|