I run the piston part way down, push in the rope, then run the piston back
up tight. The tool I use to compress the spring is a K-D 2078. Here is a
picture of one.
http://www.sjdiscounttools.com/kd2078.html
Richard
Subject: Valve seal R/R U20
> Hello again,
>
> Ok so I'm getting a universal valve spring compressor to do the job.
My only question now is do I feed the nylon rope in with piston at BDC and
then turn crank to squish the rope up or do I set piston to TDC and then
feed as much rope in with out moving crank? Thanks guys
>
> Tom
|