That's weird. Full fluid level. Any leaks? Have you checked your linkage
between the pedal and clutch master cylinder?
I guess you could dis-connect the fluid line and replace it with a short piece
of tubing. Loop the tubing back into the reservoir, pump the clutch and watch
for fluid flow. That's also a good method to bleed the clutch MC. Be very
careful with the fluid, if it's not synthetic. It will destroy paint in a
hurry.
Dan McHatton
'66 1600
------------------------
What would be a good test for the master cylinder? I had no clutch
going home Friday, It left rather quickly. The fluid level is ok, but
when I depress the clutch pedal, there is no movement in the fluid with
the cap off.
Richard
|