Thank you all for the advice.
Richard from GA was gracious enough to set me up with both parts. It's
nice to know that I am not the only one in GA with a roadster.
Thank you Richard
James & Susan Richards
<mailto:jmr407@mindspring.com> jmr407@mindspring.com
-----Original Message-----
From: SPL311RDST@aol.com [mailto:SPL311RDST@aol.com]
Sent: Sunday, February 08, 2004 11:50 AM
To: jmr407@mindspring.com; datsun-roadsters@autox.team.net
Subject: Re: brake bleeder
You can get the bleeder screw at any decent auto parts store (NAPA) it's
a 3/8-24. Look for "Speed Bleeders" its got a check valve for one-man
bleeding. Quite the handy item.
The insulator block may or may not be available at NAPA as well - if you
get the right parts guy to read through the back of the picture catalog
you may find one. The dealer may also have the same part. A wrecking
yard would be a good choicd too.... pretty standard item on old Datsun
dizzies.
::::::::::::::::::::::
Laurie :-)
'70-SPL311
AzROC
Chandler, AZ
|