R 1600 cc engine 342 lbs. 4-speed transmission I guess 70 to 75 lbs.
Thomas
citerar Marc Tyler <marc@animalfirm.com>:
> On the weight, I don't remember ever seeing a definitive figure on
the
> R16/4spd combined weight. The tranny is fairly easy to sling around,
> I'd guess 50# or under. the motor though, i dunno. Are you using a
> cherry-picker type hoist or a drop hoist from a beam? The regular 12
> oz rust-oleum type spray caps fit over the tailshaft nicely.
>
> -Marc
>
> On Thursday, November 6, 2003, at 11:18 AM, David R. Conrad wrote:
>
> > List:
> >
> > Have to reconfigure my hoist arrangement for an engine pull.
> > Would like a good figure for the weight of the engine/tranny to
> > assure adequate margin of safety.
> >
> > ...And does anyone recall the "kind of can" that someone of the
> > list found, which makes a good cap to duct tape over the tranny
> > end to avoid lubricant loss. Don't want to drain it this time
> > since it has just been drained and refilled!!
> >
> > Thanks,
> >
> > Dave
> > '68 1600
> > Kailua-Kona
> >
> ===============================================
> Marc Tyler Sisterdale TX
> 1970 1600 #SPL311-31016
> 1965 L-320 #L320 013642
> http://datsun_marc.tripod.com/cgi-bin/datsun_homepage.html
|