Mike,
If you have pitting in the bore it will still leak if you rebuild it.
The "pots" were still available through Nissan as less than a year ago. The
other option is to have it relined. A couple of outfits to a good job of
that. However, if you have lived right replacing the rubber bits with a
rebuild kit will fix it.
There is a retaining pin inside the pot. Compressed air to push it out
is the best way. Make sure to wrap it in a rag to catch the brake fluid and
parts that will want to go everywhere.
keith
> Hi all,
>
> I think I have a leak in one of my front calipers. so I am going to pull it
> off a rebuild it. any suggestions on how to do it and what to look for
> would
> be great. how do you get the piston out of the body?
>
> thx,
>
> mike in Vegas
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|