Pat, I did forget the sbrake wire. I have told Joe about that.
Richard.
----- Original Message -----
From: "Patrick J. Horne" <horne@cs.utexas.edu>
To: "reblues" <reblues@reblues.net>
Cc: "Joe Rubio" <joe@venuesports.com>; <datsun-roadsters@autox.team.net>
Sent: Tuesday, October 08, 2002 12:57 PM
Subject: Re: 1970 electrical help
>
> Richard,
>
> On a 1600 the temp wire is on the driver's side, which should leave only 2
> wires coming through the firewall on the passenger's side, unless the car
> has an electric oil pressure gauge, which I don't think it does. Your list
> should be correct for a 2L though.
>
> Peace,
> Pat
> - Support Habitat for Humanity, A "hand up", not a "hand out" -
>
> Pat Horne, Network Manager, Shop Supervisor/Future planner, CS Dept,
> University of Texas, 1 University Station C0500,Austin, Tx. 78712-1188 USA
> voice (512)471-9730, fax (512)471-8885, horne@cs.utexas.edu
>
> On Tue, 8 Oct 2002, reblues wrote:
>
> > Joe,
> > I believe the 4 wires coming out are
> >
> > 1. Water temp sending unit.
> > 2. To resistor block
> > 3. Bypass resistor block on start.
> > 4. Coil to distributor.
> >
> > If you have power to the ignition switch then you should be able to
test
> > as follows.
> >
> > One wire should be hot anytime the ignition is on. This should be
the
> > one to the resistor block.
> > One should be hot only when the ignition switch is moved to start.
This
> > should be the resistor bypass straight to the coil.
> > If neither of these wires is connected to the resistor or coil then
you
> > should be able to test for the water temp wire by grounding the other
two
> > one at a time. If your temp gauge is working, when you ground its wire
the
> > gauge should move.
> > By elimination the last one should go to the distributor.
> >
> > Richard
> > ----- Original Message -----
> > From: "Joe Rubio" <joe@venuesports.com>
> > To: <datsun-roadsters@autox.team.net>
> > Sent: Monday, October 07, 2002 6:03 PM
> > Subject: 1970 electrical help
> >
> >
> > > Folks,
> > >
> > > My buddy and I have hit our heads against a wall. We are trying to
> > > finish up my 1970 1600 with a 2000 engine. The problem is as follows,
> > > he nor I have a frame of reference for knowing how to hook up the
coil,
> > > the alternator and the starter. This comes from the fact that the
> > > previous owner had a tractor engine in the car and redid all the
wiring,
> > > so we have no idea what goes where because the car didn;t have
anything
> > > but an empty engine compartment when we got it. Everything just is a
> > > mess and doesn't make any sense. Add to that the fact that different
> > > Datsuns Roadsters have different set-ups meaning we cannot look at
> > > photos on the net and get a clear idea of what goes where. We are
> > > stuck. We can probably redo the whole thing from the wiring diagram,
> > > but we like to avoid having to do that. What we ideally need is
someone
> > > who knows the electrical set up on a 1970 1600/2000 SU car who can
> > > assist us. As I see it, the engine compartment has 3 basic harnesses,
> > > one for the lights, etc in the front of the engine compartment (we
have
> > > a new one of those) and then 2 additional ones. Is there anyone in San
> > > Luis Obispo who knows 2000's well enough that can tell us exactly what
> > > goes where by taking a look at my screwed up electrical situation in
> > > person and advising us a course of action? If there is someone in the
> > > East Bay Area in Fremont, Walnut Creek, Danville or even San Jose who
> > > can help, that would be great too. My buddy is up there next week for
> > > business and can stop by to take some digital photos of your car and
> > > chat. See he's the brains of the opperation, but he's a muscle
car/Saab
> > > guy, not really a Datsun Roadster guy so he's lost, which means I'm
> > > lost.
> > >
> > > I know I've made this request before, but we thought we could figure
it
> > > out on our own. Turns out, we can't. The bummer is we have all the
> > > mechanical in, ready to go. New brakes, new rebuilt engine, rebuilt
> > > carbs, rebuilt starter, new batter tray, cables and battery. New
> > > clutch, cleaned out gas tank, new hoses throughout. New tires on the
> > > way, Miata seats getting ready to come in from Florida. The thing is
> > > ready to roll, but we need spark. Can anyone help us out?
> > >
> > > Let me know. Appreciate any input you guys can offer. We're going to
> > > get this damn thing to Solvang this year of it kills us. It looks
like
> > > it just might.
> > >
> > > Joe
> > >
> > > /// datsun-roadsters@autox.team.net mailing list
> > > /// Send admin requests to majordomo@autox.team.net or go to
> > > /// http://www.team.net/cgi-bin/majorcool
> > > /// Archives at http://www.team.net/archive
> > > /// Send list postings to datsun-roadsters@autox.team.net
> >
> > /// datsun-roadsters@autox.team.net mailing list
> > /// Send admin requests to majordomo@autox.team.net or go to
> > /// http://www.team.net/cgi-bin/majorcool
> > /// Archives at http://www.team.net/archive
> > /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|