One thing you might check is how the front and rear linkage went together.
One is bent into a 'U' shape and the other slides into it. If it is on top
of the 'U' it will give you some really strange results.BTDT.
Best regards,
Fred Schroeder
'70 2000
SRL311-13359
TDROC
Home page http://home.texoma.net/~sitsinwest/
----- Original Message -----
From: "Dennis Louthan" <dennisl@cvinn.com>
To: "Datsun Roadster Group (E-mail)" <datsun-roadsters@autox.team.net>
Sent: Monday, June 24, 2002 9:57 AM
Subject: SU Question
> Just got my 1600 back together and running, valves adjusted,
> timing right on ( Non smog dist) . Started in on the carbs, I cannot get
the
> idle to
> smooth out. Using the unisync gauge I cant seem to find a happy
> median between the 2 carbs, either one goes all the way to the top
> of the gauge or bottom. Cant seem to get them together...any suggestions.
> Both carbs have been rebuilt, floats adjusted, dash pots within 1/2 in
from
> the top, no vacumm leaks.
>
> Dennis
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|