Hi All
The original stamp size were metric
4mm for the id tag
6 mm for the engine block
8 mm for the frame
Carl
----- Original Message -----
From: "sidney raper" <spl310@hotmail.com>
To: <datsun-roadsters@autox.team.net>
Sent: Thursday, June 06, 2002 6:56 PM
Subject: ID tags and number stamps revisited
> I just stamped a replacement tag for SRL311-00060. The engine number is
> 00233, so I was able to compare the stamp sizes and the font once stamped.
> Well, the stamps that I have are almost identical to the original
stampings
> after comparing them to the original tags that I have from deceased cars.
> The differences are almost indistiguishable. I also compared the numbers
> that I did not stamp with the tags, so these are great! These are even
the
> same size stamps (not smaller as I had thought - deceptive until you
> actually stamp these little buggers!)
>
> Sidney Raper
> 1964 1500
> 1967 SRL311 00060
> 1967 SRL311 00076
> Jacksonville Florida
> http://www.geocities.com/roadsternut/index.html
>
>
>
> _________________________________________________________________
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|