datsun-roadsters
[Top] [All Lists]

Re: New Exhaust question, need help

To: <datsun-roadsters@autox.team.net>, "Adam Bradley"
Subject: Re: New Exhaust question, need help
From: "Deena Petrie" <dpetrie@megsinet.net>
Date: Thu, 3 Jan 2002 20:07:27 -0600
Adam,
Thanks for the info.  What we noticed is that the pipe just above the
collector is right up against the lower part of the block. Is this normal?
Yes we did switch the starters.  Thanks to Ross, he sent me what I needed.

Deena
69 1600 in progress
Westmont, IL

----- Original Message -----
From: Adam Bradley <ambradley@yahoo.com>
To: Deena Petrie <dpetrie@megsinet.net>; <datsun-roadsters@autox.team.net>
Sent: Thursday, January 03, 2002 7:58 PM
Subject: Re: New Exhaust question, need help


| You need to replace the 1600 starter with a shorter 2000 starter, under
| $100 rebuilt.  I'm sure a heat shield would also be good.
|
| The header fits flush with the head; any gaps will create exhaust
| leaks.  You also need to be sure it is held tight, since the flange is
| probably thinner than the intake manifold.  Mine had rectangular blocks
| welded on the flange so it would hold tight with the donut washers and
| nuts.  BTW, if you don't have those thick donut washers, you can get
| them by the gross at your local pick & pull from 260z's and 280z's.
|
| I had two minor problems, really more irritations, with my header -
| one, the shiny paint peels right off once you run the car, and two, I
| had to dent the #2 pipe to keep it from hitting the intake manifold.  I
| painted my header with exhaust paint.  If possible, get a jet-hot
| coated header, which looks nifty and supposedly lasts longer/reduces
| heat/jumps higher/tastes great/etc.
|
| --- Deena Petrie <dpetrie@megsinet.net> wrote:
| > Hi List,
| >
| > We are installing a new header and are wondering if it is supposed to
| > fit
| > tight up against the block?  Next is there a type of shield to
| > protect the
| > starter from getting to hot? It seems that the starter would burn up
| > being
| > that close to the header.  Any Ideas?
| >
| > Thanks again
| > Deena & Joe
| > 69 1600 still in progress
| > Westmont, IL
| >
| > ///  datsun-roadsters@autox.team.net mailing list
| > ///  Send admin requests to majordomo@autox.team.net  or go to
| > ///  http://www.team.net/cgi-bin/majorcool
| > ///  Send list postings to datsun-roadsters@autox.team.net
| >
|
|
| =====
| Adam
| '70 1600 SPL311-28181
| http://www.picturetrail.com/abend
|
| Send your FREE holiday greetings online!
| http://greetings.yahoo.com
|

///  datsun-roadsters@autox.team.net mailing list


<Prev in Thread] Current Thread [Next in Thread>