Mark Wrote - Does anyone have a list or chart of wheel / tire combinations (
wheel size & offset or backspacing
--------------
Offset depends on wheel width. a 6'' wheel will want a -15 to -20 mm (the
mounting plane will be 15 ~ 20 mm outboard of the wheel center line). as you
go wider, you'll want more negative offset until the point where the tire
starts to contact the rear springs. A good fitting wheel will take a
195/60/14 nicely
Larry Wrote - I would like to know this so I can add some nice Panasports
for a basic 14 inch wheel.
-----------
Your in luck. Our Vendors have worked with Panasport for the best
configurations. Start there and the guess work will be out of the picture.
Lou Wrote - Does anybody know if 280z wheels (i think about 1980)work on a
'66 - i got 5 (unmounted w/out lugnuts with the car)
--------------
They fit but take care. Most Z's have a 0 offset which means the wheel will
stick out too far and rear fender contact will result. Again, this varies
from set to set
|