I have the 3/8 x 24 tpi speedbleeder #SB3824 on all four corners, as well as
the clutch slave installed on the race car. Liked them so much I bought a
second set for the street car.
--
Chris Coker
69 1600 SPL311-24529 <http://members.home.net/cfcoker/roadster.html>
6? 1600 GP Race Car <http://members.home.net/cfcoker/racecar.html>
Royal Oak, MI
> Thanks,
> But I think that I will wait for someone who for sure knows what size.
> Besides the front and rear brakes is there anywhere else these would work
> on a roadster...don't have mine sitting right here in front of me but what
> abou ton the clutch slave or brake and clutch master cylinders??
> Daniel 69 2000
> SF CA
>
>>
>> There is a link to the SpeedBleeders on the NOWROC site:
>> http://www.nowroc.com/Webpages/Links.htm
>>
>> I believe the size is 3/8" x 24 tpi.part# SB3824 front and rear
>>
>> Daniel Beatty
>> NOWROCer
>>
>> -----Original Message-----
>> From: owner-datsun-roadsters@autox.team.net
>> [mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of Daniel Neuman
>> Sent: Tuesday, April 03, 2001 4:15 PM
>> To: datsun-roadsters@autox.team.net
>> Subject: Speed Bleeders
>>
>>
>> Hello All,
>> Going to do the annual springs coming time to swap out the brake
>> clutch fluid thing. I want to install speed bleeders in my car I know
>> some of you have done this can I get a part number and any advice for this?
>> Thanks,
>> Daniel 69 2000
>> SF CA
>> -----Original Message-----
>> From: owner-datsun-roadsters@autox.team.net
>> [mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of Daniel Neuman
>> Sent: Tuesday, April 03, 2001 4:15 PM
>> To: datsun-roadsters@autox.team.net
>> Subject: Speed Bleeders
>>
>>
>> Hello All,
>> Going to do the annual springs coming time to swap out the brake
>> clutch fluid thing. I want to install speed bleeders in my car I know
>> some of you have done this can I get a part number and any advice for this?
>> Thanks,
>> Daniel 69 2000
>> SF CA
|