Sears sells a ratchit screwdriver that would be of immense help. It's about
4" long and has a knurled handle on the top so you can spin it by hand.
Probably about 1" high with the screw bit installed.
Mike
----- Original Message -----
From: <Fred_Katz@ci.sf.ca.us>
To: <datsun-roadsters@autox.team.net>; "Brian St. Jacques"
<brian@varatouch.com>
Sent: Monday, March 19, 2001 4:30 PM
Subject: Re[2]: A small tip for removing your high-windshield dash
> On 3/19/2001 11:00 AM
> "Brian St. Jacques" <brian@varatouch.com> wrote:
>
> >I used one of those "Z" shaped phillips screwdrivers. Took a little
while,
> >but worked well.
>
> Ditto, used one to remove a dash. Also, you can take a long phillips
> screwdriver, put it in a vise and bend it near the tip at a 90 degree
> angle.
>
> Fred
|