Mike, removed one from the U20 in the garage, length 1 7/16", oal 2 1/4",
OD 7/16", ID 3/8", I hooked it to my 100LB. game scale takes about 8 lbs of
pull to extend. mine may not bee original. but it is off of a running eng.
Russ Southwell 70 1600
datsunmike wrote:
> > I may have found a place that carries substitute springs for the U20 . The
> > problem is I need the dimensions of the spring.
> >
> > Body length
> > Overall length
> > Wire diameter - use a caliper please
> > body diameter
> >
> > I do believe I can also get springs that use less force so as not to wear
> > out the bushings.
> >
> > I do believe the springs I have are for a 1600 and I don't remember what
> the
> > springs look like for the 2L. I have a whole bunch of different types that
> I
> > had replated but I don't know which one it is.
> >
> > Mike
|