All,
Doesn't one of the specialty cam manufacturers make cams for the U-20?
Sid
>From: STAN CHERNOFF <az589@lafn.org>
>Reply-To: STAN CHERNOFF <az589@lafn.org>
>To: haugchiro@moscow.com, "datsun-roadsters@autox.team.net"
><datsun-roadsters@autox.team.net>
>Subject: Re: A cam vs. B cam and More!
>Date: Sun, 04 Feb 2001 18:40:46 -0800
>
>Bob,
>
>I think they are extinct as far as Nissan is concerned.
>
>Stan
>=============
>
>At 06:14 PM 2/4/01 -0800, R Haug wrote:
> >STAN CHERNOFF wrote:
> >
> >> Why stop with the "B" cam instead of the cam from Nissan called "Solex
>II"
> >> and sometimes referred to as the "C" cam. This cam had more lift and
> >> duration than the "B" cam and had the same base circle diameter so the
> >> rocker geometry was correct. The marking on the Solex II cam was
>marked
> >> "25510" and was supplied through the Datsun Comp department. These
>were
> >> not regrinds.
> >
> >Stan,
> >Are the C cams still available new or is it NLA.
> >Bob
_________________________________________________________________
|