Re: grease

[R Haug <haugchiro@moscow.com>]

Taylor McCarney wrote:

> i found 18- that leaves 4 i missed .

Taylor,
The grease zirks are located as follows:

Per side:
Upper and lower ball joints  = 2
Spindle shafts front and rear = 4        Both upper and lower
Outer tie rod                        = 2
                                      total 16

Center steering rod               = 2
Idler box                                 1  on the opposite side of
steering box
U-joints                               = 2   not all cars will have
these zirks
Parking brake pivot on rear end housing (passenger side)

This should help identify all of the locations.
Bob