I have the fronts and rear flares on the race car. I
got hte ones from Japco and they were $55 ea at the
time. Easy Istallation. Took me, some duct tape, a
drill and rivet gun three hours. Now, remember this
was for the race car, so I did not put a small recess
area on the edge and inset the flares. So far they
have taken some pretty good shots by pylons while
autocrossing and have not broken. One front has a
small crack where I took out a cone this past weekend
(on a course I designed) when I was halfway through
4th gear (about 85).
Make sure that you measure each flare through, the
right front was about 1" longer along the rear edge
and I had too cut it of before I mounted it to the
car.
Don Miller
69 Turbo V-6
Meridian, ID
__________________________________________________
|