datsun-roadsters
[Top] [All Lists]

RE: 5.60 - 14 tires

To: "'Thomas'" <csp311@telia.com>, bob_wilson@agilent.com
Subject: RE: 5.60 - 14 tires
From: "Hall, Phillip" <Phillip.Hall@msfc.nasa.gov>
Date: Mon, 28 Aug 2000 12:29:45 -0500
If anyone is interested, I know where to get a set of original tires from
'66 (I think) still in the paper wrapping.  Good for that "perfect to the
last detail " restoration. 

 I am mostly Swedish, but don't know Swedish - I guess you are safe
Thomas:-)  You did that mm thing to mess with our heads didn't you :-)

Phil
SEROC

        -----Original Message-----
        From:   Thomas [SMTP:csp311@telia.com]
        Sent:   Monday, August 28, 2000 12:00 PM
        To:     bob_wilson@agilent.com
        Cc:     datsun-roadsters@autox.team.net
        Subject:        Re: 5.60 - 14 tires

        A new 5.60-14 diagonal ply tire is 645 mm diameter.
        The 80% +-2% or 80-profile is only used for radial tires
        if no profile is given in the dimension code.

        Thomas

        PS. Any flaming sent to me must be written in Swedish from now on.
        Thank you!






        bob_wilson@agilent.com wrote:

        > HI list,
        > The stock tire that is listed on the original spec sheet for the
roadsters
        > is 5.60 - 14.
        >
        > Does anyone know what the final tire outside diameter was?  Some
have said
        > that when the aspect ratio is not given (the 2nd number in the 3
number
        > designation) that you are to assume 80% (or 78%).  Using this
results in an
        > outside diameter of the wheel/tire of around 23".
        >
        > Yet people on the list have discussed wheel/tire combos that
result in more
        > than 24" outside diameter.
        >
        > I can't seem to find any description of this old numbering scheme
(x.xx - yy
        > versus the new scheme xxx/yy - zz).
        >
        > Bob Wilson
        >
        > -----Original Message-----
        > From: Fred_Katz@ci.sf.ca.us [mailto:Fred_Katz@ci.sf.ca.us]
        > Sent: Friday, August 25, 2000 10:19 AM
        > To: Chris
        > Cc: Datsun roadster list
        > Subject: Re[2]: Wheel Offset
        >
        > Chris,
        >
        > Go with CDM on this one. Not all Panasports bolt right up on our
roadsters
        > without interference. Les & Dennis will do it right for you. I
don't know
        > that Dean wouldn't. But CDM went out of their way to explain what
works
        > best for me, and they know Panasports. I would have their
Panasports on my
        > '66 if I didn't end up getting Libras after admiring Calspeed's
Libras.
        >
        > Fred
        > BADROC
        >
        > ________________________ Reply Separator
__________________________
        > >Subject: Re: Wheel Offset
        > >Author:  Dennis Currington <dc311@mail.com>
        > >Date:    8/25/2000 8:26 AM
        > >
        > >Chris wrote:
        > >
        > >> Let's all chant the mantra . . . Panasport, Panasport,
Panasport.
        > >Dean at > Fairlady has 'em.  www.datsunparts.com on the
suspension
        > >page.
        > >
        > >AND SO DOES LES & DENNIS AT CDM :-) at classicdatsun.com.......
        > >
        > >Dennis
        > >--
        > >Dennis Currington
        > >San Diego
        > >Datsuns.net
        > >

        

<Prev in Thread] Current Thread [Next in Thread>