I used penetrating oil (I know snake oil to some people) and a dremel tool
with a wire brush attachment to clean as many of the threads as I could
reach before I started taking off the nuts. Got almost all of the off okay.
broke four or five I think. Just MHO.
Don Miller
68 1600
Meridian, ID
>I'm not sure about 67.5s side trim but my 67 has nuts holding the side
>trim on, not clips, each one has a nut, lock washer, and a flat
>washer. Some of them are a real challenge to get to, but it can be
>done. Hope this will help. Bill
|