Rockstar (?)
I too had a "short" but if you measure it you will find it is 4" from
engine mounting face to flange face - but the one Margus made was only 3" -
and that's to the END of the shaft. The shaft stuck out 1/2"on the "short"
Buick one . It would be interesting to measure it. Attached is a photo of
the 4" version - which, as I said, is now 3".
At 07:50 PM 11/22/01 -0500, RockStar30cars@aol.com wrote:
>Hello Barrie, the water pump off a late model V6 is a short type water pump I
>have used one for a 68 Buick 350 which is the long type on my SD1
>
Regards
Barrie
Barrie Robinson - barrier@bconnex.net
///
/// buick-rover-v8@autox.team.net mailing list
///
|