british-cars
[Top] [All Lists]

[British-cars] Voltage Stabilizer for TR3

To: <triumphs@autox.team.net>, <british-cars@autox.team.net>
Subject: [British-cars] Voltage Stabilizer for TR3
From: <wbeech@flash.net>
Date: Fri, 7 May 2010 14:53:12 -0600
Hello List,

Having some problems with erratic readings from my new sending unit recently
acquired from BPNW.  I have checked everything to be sure the connections
are tight, even ran an additional ground wire from the gauge to the dash
panel.

Still no improvement, so I wrote to BPNW and they say I should have a
Voltage Stabilizer pn=148876D mounted behind the gauges.  I don't recall
anything like this in any TR3 documentation.  When I look this part up on
the BPNW web site it shows to be an MG part, but BPNW insists this is what I
should have for the Triumph.

 

Has anyone installed one of these on a TR3?  

http://www.bpnorthwest.com/.sc/ms/bdd/ee/9955/Voltage%20Stabilizer
<http://www.bpnorthwest.com/.sc/ms/bdd/ee/9955/Voltage%20Stabilizer> 


Bill Beecher
'58 TR-3A TS 30766 L aka "Tar Baby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
_______________________________________________
British-cars@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>