Thanks Terry... found what I was looking for in their catalog.
Mike
----- Original Message -----
From: TATERRY@aol.com
To: barneymg@MGAguru.com ; mikedenman@sbcglobal.net ; mgs@autox.team.net ;
british-cars@autox.team.net ; triumphs@autox.team.net
Sent: Tuesday, September 14, 2004 6:40 AM
Subject: Re: Gas filler grommet/seal
In a message dated 9/13/2004 10:44:55 PM Pacific Standard Time,
barneymg@MGAguru.com writes:
At 08:17 PM 9/13/04 -0700, Mike Denman wrote:
>.... looking for a part for an old TVR .... The metal tube that goes
>between the gas cap and the flexible hose to the gas tank is 2.250" (2
>1/4") in diameter and I am looking for the lip seal that fits around the
>filler tube where it goes through the body. .... which of the various
>British Cars used a 2 1/4 in filler tube. ....
MGA is 2". Keep looking.
Barney Gaylord
Check out Paul Beck at http://www.vintagecarparts.co.uk/
He carries a lot of these big grommets.....
Terry in Oakland
|