In a message dated 9/13/2004 10:44:55 PM Pacific Standard Time,
barneymg@MGAguru.com writes:
> At 08:17 PM 9/13/04 -0700, Mike Denman wrote:
> >.... looking for a part for an old TVR .... The metal tube that goes
> >between the gas cap and the flexible hose to the gas tank is 2.250" (2
> >1/4") in diameter and I am looking for the lip seal that fits around the
> >filler tube where it goes through the body. .... which of the various
> >British Cars used a 2 1/4 in filler tube. ....
>
> MGA is 2". Keep looking.
>
> Barney Gaylord
>
Check out Paul Beck at <A
HREF="http://www.vintagecarparts.co.uk/";>http://www.vintagecarparts.co.uk/</A>
He carries a lot of these big grommets.....
Terry in Oakland
|