british-cars
[Top] [All Lists]

TR7 BFH#26

To: Triumphs@autox.team.net, british-cars@autox.team.net,
Subject: TR7 BFH#26
From: Eganb@aol.com
Date: Sat, 11 Nov 2000 08:36:35 EST
I'm tempted to put on a Speedi Sleeve on the rear of the crank to help 
prevent oil leakage from the rear seal after it starts to wear.  I haven't 
installed the back plate with the rear oil seal yet.  

If the front oil seal leaks at a later point, I should be able to put in a 
sleeve later with the car still in the engine.  I could do it now, but I 
would have to pull the timing chain cover off, get new gaskets, etc....

Any thoughts on this, and anyone happen to know the exact diameter of a TR7 
crank at either end?


Bruce
1980 Inca Yellow TR7 5-speed convertible
Chapel Hill, NC

<Prev in Thread] Current Thread [Next in Thread>