You write:
> > Should a TR6 accellerate smoothly in 4th gear from about 1750 RPM?
> It actualy should accelerate from about 1000 RPM up in 4th smooth, but
> not with full power (the good torque begins at about 2000 RPM's).
> I've got this problem with my TR6 (carb.) too. This is mostly a
> ignition problem. (it was with mine) but may be a carb problem, too.
> If it's a ignition problem it can be solved easely by changing sprac
> plugs and ignition wires. Carbs must be adjusted, too. But there may
> be more serious problems that cause these symtoms.
Markus,
Thanks for the response; it turns out to be the only one I've
recieved!
-ken
Kenneth B. Streeter | ARPA: streeter@sanders.com
Lockheed Sanders | UUCP: ...!uunet!sanders.com!streeter
PTP2-A001 |
65 River Road | Voice: (603) 885-9604
Hudson, NH 03051 | Fax: (603) 885-0631
|