>I have been poking around, looking for a tap for the holes that the rotoflex
>bolts thread into on my GT6+. Well, it is 13mm 1.25 pitch and doesn't seem
>to reside on any shelf I have found.
Are you sure this is the correct size? None of the thread or tap charts I have
show a size of M13, they all jump from M12 to M14. I also looked in machine
tool catalog and there's no such thing. I don't have rotoflex's on my GT6,
maybe someone who does can help. The other thing to do is drill it out a
little bigger and tap it to a standard size. I had an engine once that had
10mm plugs in the oil gallery. Couldn't find replacements anywhere, so I just
tapped them 1/8" NPT and got plugs at the hardware store.
Mike G.
|